Skip to content
Black Friday · $25 off orders $300+ with code SAVE25 · Free chain with selected kits › $25 off orders $300+ with code SAVE25 ›
Free chain with selected WHEELTOP kits · Ends Dec 1
WHEELTOP electronic shifting kits

Black Friday Sale

Black Friday on WHEELTOP electronic shifting

$25 off orders $300+ with code SAVE25

Ends Dec 1

Shop Black Friday deals ›
WHEELTOPUDHCompatibility

WHEELTOP OX 2.0 and GeX on UDH Frames: What "Partially Compatible" Means

WHEELTOP OX 2.0 and GeX on UDH frames: the derailleur is a standard hanger-mount, WHEELTOP lists UDH as partially compatible, and how to check smallest-sprocket clearance before you ride.

Quick answer: the WHEELTOP EDS OX 2.0 and GeX rear derailleurs can be fitted to frames with a UDH (Universal Derailleur Hanger), but WHEELTOP itself lists UDH frames as "partially compatible", not as a guaranteed fit. They are standard hanger-mount derailleurs: the UDH hanger stays on the frame and the derailleur bolts to it. On a small number of frames the derailleur body or the B-tension block can lightly touch the frame at the smallest sprocket, so check by hand before you ride.

UDH frames are common on current mountain and gravel bikes, so this is one of the questions we are asked most about the OX 2.0 and GeX. This page sets out what is confirmed, what "partially compatible" means in practice, and the checks that settle it on your own bike.

How the derailleur mounts on a UDH frame

The OX 2.0 and GeX use the same rear derailleur hardware, so everything below applies to both. It is a standard hanger-mount derailleur, mounted the same way as a conventional derailleur. The UDH hanger stays on the frame and the derailleur is bolted onto it, and no separate adapter is needed for this.

It is not a hangerless direct-mount design like SRAM Transmission (T-Type), where the derailleur mounts without a hanger. Do not treat it as a direct-mount part.

Why WHEELTOP says "partially compatible"

WHEELTOP's own guidance classes UDH frames as partially compatible rather than fully compatible. The reason is clearance. On a very small number of frames, the derailleur body or the B-tension screw block can lightly interfere with the frame when the chain is on the smallest sprocket (the highest gear). That is the area around the rear dropout and thru-axle.

Most frames are fine. We cannot give you a list of which frame models are affected, because we do not have one, and we will not claim a universal fit. The check below takes a couple of minutes and tells you for certain.

Check these before you ride

  1. Look at the hanger from behind. It must be straight and parallel to the cassette. A bent hanger should be straightened or replaced first.
  2. Check the step at the bottom of the hanger. The small tab next to the derailleur mounting bolt must sit on the step before you tighten the bolt, which is what lets the derailleur swing back and forth. If the step is too small, use a hanger with a larger step or a hanger extender.
  3. Tighten the derailleur mounting bolt to 8.0–10.0 N·m. Do not put grease on the bolt or on the hanger threads. Wrong torque can deform the hanger or make the shifting poor.
  4. The best shifting is reached when the distance from the inner face of the hanger to the outside of the smallest sprocket is 4–6 mm.

Run your frame and cassette details through the WHEELTOP UDH compatibility tool before installing.

  1. Fit the chain, shift to the smallest sprocket, and move the derailleur by hand. Check that nothing rubs against the frame near the dropout or thru-axle. Only then set the limits and calibrate in the WHEELTOP app.

A correctly fitted WHEELTOP rear derailleur floats back and forth like any other derailleur. If yours does not, the tab is probably not seated on the hanger step.

If you are not sure

If your frame has an unusual dropout or thru-axle design, or the hand check shows rubbing at the smallest sprocket, do not ride it. Send us the frame model and a photo of the dropout area before ordering or fitting, and we will tell you what we can confirm.

Looking for a standalone OX 2.0 or GeX rear derailleur rather than a full kit? See WHEELTOP derailleur components.

Sources: WHEELTOP installation manual and official compatibility guidance. Last checked 10 November 2026.

Explore OX 2.0 and GeX Kits

Compare current 1x wireless kits on our WHEELTOP EDS OX 2.0 (MTB) and WHEELTOP EDS GeX (Gravel) pages. For cassette max-cog limits and chain checks, see our cassette and frame compatibility guide and the WHEELTOP user manuals.