WHEELTOP EDS Compatibility & Spare Parts.
Published cassette limits, cage sizes, brake mount rules, UDH clearance checks, LED fault codes, and standalone replacement parts — maintained by Aoeagle Smart Cycling.
Fit & cage checker.
Pick your bike style and drivetrain specs to match the exact WHEELTOP EDS series, cage length, product kit, and installation checks.
Compare WHEELTOP EDS series.
Speed count is configured in the WHEELTOP app rather than fixed in hardware. Published small-cog minimum is 10T across current kits.
| Series | Discipline | Drivetrain | App Speeds | Cage & Max Cog | Brake Support | Series Hub |
|---|---|---|---|---|---|---|
EDS TX | Road (Drop Bar) | 2x (or 1x without FD) | 7–14 speed | Alloy/carbon or ceramic OSPW · up to 36T | Rim brake or Flat Mount disc (160 mm, BH90) | |
EDS GeX | Gravel (Drop Bar) | 1x only | 3–14 speed | 75 mm up to 42T · 93 mm up to 52T | Flat Mount hydraulic disc (160 mm) or rim brake | |
EDS OX 2.0 | MTB / Flat Bar / Folding | 1x only | 3–14 speed | 58 mm (32T) · 75 mm (42T) · 93 mm (52T) | Uses existing MTB brakes (or standalone 4-piston kit) | |
EDS TXF | Folding / Flat Bar | 1x only | 7–14 speed | 58 mm alloy (32T) · Carbon ceramic OSPW (36T) | Uses existing folding-bike brakes (shifter + RD kit) | |
EDS TT | Triathlon / TT | 2x | 7–14 speed | Up to 36T (chainrings up to 53T) | Rim brake (no levers) or Flat Mount disc (BL-TT7110, 21 mm) |
Frame, UDH & chain checks.
Verify these five hardware boundaries before ordering or bolting up a new groupset.
-
UDH Frames (Partially Compatible)
OX 2.0 and GeX use standard hanger-hook mounting — not hangerless direct-mount (not SRAM T-Type). Keep the UDH hanger installed and bolt the derailleur to it. Always shift to the smallest cog by hand to verify dropout clearance.
Read UDH clearance guide -
Brake Mounts & Hydraulic Fittings
EDS TX, GeX, and TT hydraulic disc calipers are Flat Mount only with 160 mm rotor mounts supplied (rotors not included). Hoses use Shimano BH90 insert/olive sizing and mineral oil.
Flat Mount vs Post Mount -
Mounting Torque & Alignment
Tighten the rear derailleur mounting bolt to 8.0–10.0 N·m dry — do not grease the bolt or hanger threads. Optimal spacing from the hanger inner face to the smallest cog is 4–6 mm.
Calibration walkthrough -
Older One-Piece Dropouts
The derailleur mounting tab requires a stop step on the hanger to swing properly. On older one-piece frames without a step, fit a derailleur hanger adapter (extender) so the tab seats cleanly.
Cassette & frame limits -
Confirmed Chain Compatibility
CHOHO chains are confirmed compatible with GeX, OX 2.0, and standard alloy or carbon cages on TX and TT — but not with the TX ceramic oversized pulley cage. SRAM Flattop and Campagnolo chain compatibility are not confirmed; email support@aoeagle.com before ordering those builds.
Ask technical support
LED status & fault codes.
Quick roadside diagnosis before assuming a derailleur or shifter has failed.
| LED Color | Shifter | Front / Rear Derailleur | First Action |
|---|---|---|---|
| Blue | Pairing or fine-tune mode | Pairing or fine-tune mode | Complete pairing or exit fine-tune in the app |
| Green | Paired / normal shift | Paired / normal shift | Normal operation |
| Yellow | Low CR2032 coin cell | Low derailleur battery | Replace CR2032 or recharge via magnetic cable |
| Red | CR2032 empty | Empty, or currently charging | Charge with magnetic cable; replace CR2032 |
| White | Shifter hardware fault | — | Test shifting from app; see roadside checklist |
Standalone replacement & repair parts.
Need a single part instead of a full groupset? Every stocked component ships tracked across the US with 1-year limited warranty coverage on electronic shifting parts.
-
Standalone Shifters & Derailleurs
Replace a single crash-damaged drop-bar lever, flat-bar trigger shifter, front derailleur, or rear derailleur without buying a full kit.
Browse shifters & derailleurs -
Rear Derailleur Pulley Cages
Replace a bent cage or switch between 58 mm (32T), 75 mm (42T), and 93 mm (52T) max-cog capacities.
Browse derailleur cages -
Hydraulic Brakes & Brake Pads
Standalone 4-piston hydraulic MTB disc brakes, calipers, levers, and replacement brake pads.
Browse brakes & pads -
Charging Cables, Batteries & Small Parts
Magnetic USB charging cables, replacement derailleur batteries, clamp adapters, stems, handlebar tape, and thru-axles.
Browse accessories & spare parts -
Compatible Drivetrain Components
Cassettes, chains, cranksets, and chainrings matched to WHEELTOP EDS road, gravel, and MTB builds.
Browse drivetrain catalog
Technical FAQ.
Which WHEELTOP EDS rear derailleur cage length do I need for my cassette?
Match by largest sprocket: EDS TX (road 2x) supports up to 36T; EDS GeX (gravel 1x) uses a 75mm cage up to 42T or a 93mm cage up to 52T; EDS OX 2.0 (MTB / flat-bar 1x) uses a 58mm cage up to 32T, a 75mm cage up to 42T, or a 93mm cage up to 52T; EDS TXF (dedicated folding 1x) uses a 58mm alloy short cage up to 32T or a carbon ceramic OSPW cage up to 36T. Published minimum small cog is 10T.
Are WHEELTOP EDS OX 2.0 and GeX direct-mount on UDH frames?
No. WHEELTOP lists UDH frames as partially compatible. The derailleur uses standard hanger-hook mounting and bolts onto the existing UDH hanger without an adapter. Always shift to the smallest cog by hand after fitting the chain to confirm clearance near the dropout.
What brake mounts and hose fittings do WHEELTOP EDS disc kits use?
EDS TX, EDS GeX, and EDS TT hydraulic disc calipers are Flat Mount only (160mm rotor mounts supplied; rotors not included) and use Shimano BH90 hose insert/olive size with mineral oil. Post-mount MTB hydraulic brakes are sold separately in our brakes catalog.
Can I buy individual WHEELTOP EDS replacement parts and spare components?
Yes. Aoeagle stocks standalone WHEELTOP EDS shifters, front and rear derailleurs, replacement pulley cages, magnetic charging cables, replacement derailleur batteries, and hydraulic brake hardware for US riders, backed by a 1-year limited warranty on electronic shifting components.
Which chains are confirmed compatible with WHEELTOP EDS?
CHOHO chains are confirmed compatible with GeX, OX 2.0, and standard alloy or carbon cages on TX and TT, but not with the TX ceramic oversized pulley cage. SRAM Flattop and Campagnolo chain compatibility are not confirmed.